This is a shot of my Jet Hot header where the AIR attachment used to be before it BLEW OFF!!!!!!!!!!

Speedo (local mechanic) was able to weld it up all nice and purty.

When I changed over to the Spohn torque arm, i had to change Y pipes. So i picked up the Jet Hot 3 inch diameter Y pipe with catalytic converters.

This is one cat that comes with the Jet Hot kit.

This piece is used in place of the cat in case you want to run the Y pipe in an off-road application. It was shipped rusty.

This is where the pipes merge on the y pipe. It is horrible; the hole isn't cut nearly enough to allow smooth flow.

The shoddy workmanship creates a ledge that the incoming exhaust slams against which result in turbulence and increased backpressure which reduce horsepower.

Return to the "Modifications" Page